435 Automatic Medical Film Processor Characteristic: a.Full new appearance,beautiful and elegant,occupy small area; b.Overall machine adopts Sanyo electric machine in connection with incline gear face decelerator drive,running calm,noise is extremely small; c.Deep slot U shape bird leading type convey construction,film after multi-layer extrusion has higher image quality. d.Full mould fabrication, characteristic stablised; e.High automatization,ready to feed film right after switch on; f.After feeding the film,automatic equipment starts the following components: 1)Drive electrode 2)Fan 3)Electricity heater 4)Medicine fluid supplying system In 3 minutes after the last film comes out,all the above-mentioned components will stop working automatically saving energy.The only unchanged thing is the developing temperature. Application: X-ray film developing,MRI,CT,DSA,laser printing reflect arranging. 1.Application:x ray,CT,MRI,DSA,laser pinting soft film fast developing 2.Film treatment specification: minimum length:4"(100mm) maximum width:17"(435mm) Narrowst:30mm 3.Film developping capacity:286pcs/hour(12" x 15") speed110s 4.Film developping velocity:dry in and dry out 90s-360s no grade adjustable(for medical use) 5.Film developping medicine liquid temperature control scope:20C-40C adjustable(under summer high temperature,recycling water automatically cool down develop film liquid function to avoid unable to develop film under high temperature,the client can get this function if requested) 6.drying temperature:40C-60C adjustable environment temperatue:5C-30C Relative humidity:85% 7.Noise:<55db power supply:220v/50hz power:maximum2.8kw 8.Medicine liquid slot volume:develop slot,flexation slot,bath slot all are 10L 9.Water consumption:2.5L/minute 10.Machine body volume:1040 x 650 x 510 (length x width x height)Machine frame excluded 11.Package size for export:1200 x 710 x 1240 gross weight:101kg