Key words: Manual moulding silicone rubber,liquid silicone rubber,RTV-2 silicone rubber,moulding silicone rubber,silicone rubber for manual moulding,liquid RTV silicone rubber 1.Applications of manual moulding silicone rubber: Manual moulding silicone rubber is mainly used for model design of manual mould, PVC plastic moulds, cement products, low melting point alloy moulds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole moulds, pad printing allocation, Electronic equipment antivibration, etc. 2. Description of manual moulding silicone rubber: manual moulding silicone rubber is a flowable liquid, and the quality has nothing to do with the color. It consists of two parts. Part A is a flowable liquid silicone rubber, part B is the curing agent. Dealing with the original model by polish the surface and print release agent first, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicone, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mould frame. The silicone mould will be cured in 2-3 hours and after 24 hours you can put it into production. Note: The time for vacuum-pumping should be less than 3-5 mins ,otherwise, once the silicone rubber has cross-link reaction during vacuumizing, and no more further steps will be available. 3.Features of manual moulding silicone rubber: a) Good elasticity b) Non-deformation c) Heat resistanct d) Low shrinkage 4. Please dont hesitate to ask if you have any questions about manual moulding silicone rubber, here Chique liu is at your service: