Technical Parameter
HMW1680
Specification Screw A Screw B Screw C
Injection Unit
Screw Diameter mm 40 45 48
Screw L/D Ratio L/D 22.5 20 18.8
Shot Volume (theoretical)cm3 245 310 353
Injection Weight (ps) g 228 290 328
Injection Rate g / s 118 150 170
Plasticizing Capacity g/d 18 22 25
Injection Pressure Mpa 196 155 136
Screw Speed rpm 0 -- 196
Clamping Unit
Clamp Force 1680
Toggle Stroke 430
Space Between Tie Bar (W*H) 460 * 460
Max Mould Height 480
Min Mould Height 180
Ejector Stroke 120
Ejector Tonnage 40
Ejector Numbers 5
Others
Max pump pressure 16
Pump Motor Power 15
Heater Power 7.5
Machine Dimension (L*W*H) 5.0 *1.4 * 2.1
Machine Weight: 5.2
Hopper Capacity: 25
Oil Tank Capacity: 250
Standard equipment:
1) Double cylinder balancing injections
2) High-torque oil-motor preplasticizing
3) Five pivots minus relief angle, double toggles, machine hinge mold locking
4) Cabinet-type holder integrates the mold plate
5) Oil motor driven gear mold adjusting
6) Storage-type grease lubricating
7) Pressure and flow whole-proportion running
8) High-performance, low-noise oil pump
9) Multi-step pressure and speed adjusting
10) High-precision position linear transducer
11) Digital memory for mold group
Injection unit:
1) Four injection pressures and speeds with three additional pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection position, providing optimum. Injection accuracy and control
6) Temperature control
7) Heating Status indication
Clamping unit:
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position
Other parts:
1) Independent core in / out pressure and speed
2) Hydraulic unscrewing sequence
3) Hydraulic oil high temperature alarm
4) System pressure gauge
5) Shot counter and reset function
6) Malfunction alarm light
7) Self-diagnostic function
8) Emergency stop buttons placed both front and rear of the machine to provide easy access