The product is made from wood flour and minerals as filler affording good electric properties. It is recommended for the production of insulating structures of low-voltage electric appliances and household articles. The product is suitable for compression molding and it is made according to the standard of GB1404-95.
Technical Properties No. Item Test standard Unit Value
1 Bulk factor GB8324 2.5
2 Specific density GB1033 g/cm3 1.45
3 Flexural strength GB9341 MPa 80
4 Notched impact strength GB1043 KJ/m2 1.7
5 HDT GB1634 160
6 Insulation resistance GB10064 1010
7 Dielectric strength (90) GB1408 MV/m 4.0
8 Dissipation factor(tan)(1MHz) GB1409 0.05
9 Molding shrinkage JB/T6542 % 0.5-0.8
10 Water absorption GB1034 mg 40
Remark: Flowability and shrinkage will be agreed between seller and buyer